榴莲视频

Products



Home > Products > Stainless Steel > Stainless Steel Rod > 316 Stainless Steel Bar

316 Stainless Steel Bar

Standard: 201, 202, 302, 304, 304L, 309, 316, 316L, 317, 321, 330, 403, 409, 416, 440C, Duplex 2507
Sizes: customized
Certifications: ISO 9001,SGS,BV
Delivery Time: 7-10 Days
Payment Term: T/T, L/C, WeChat pay, Alipay, etc
Transport: Suit for all kinds of transport, or as required

WeChat：+86 13337918168

贰尘补颈濒：尘辞苍颈肠补蔼濒丑蝉迟别别濒驳谤辞耻辫.肠辞尘

Send Inquiry

Chat Now

Product Detail

Suppliers of 316/316L Stainless Steel Bars/Rods – Call Us Now!

榴莲视频 is a full line distributor, processor, manufacturer and supplier of 316 stainless steel bars and 316/316L stainless steel rods in all standard sizes and finishes. 316/316L stainless steel bars and rods supplied by 榴莲视频 are certified to highest level of industry standards, and are accompanied by Mill Test Certificates, as per EN 10204 3.1. We can supply cut to size 316 grade stainless steel bars, with both small and wide diameters. Our stock of 316/316L stainless steel round bars includes outside diameter from 6mm up to 500mm, with Ultrasonic Test Reports, Chemical Test Reports, as well as Mechanical Test Reports.

· Order Large or Small Quantity of 316/316L Stainless Steel Bars, Stainless Steel Rods

· Cut to Size 304 Stainless Steel Rods and 316/316L Stainless Steel Bars Available

· No Minimum Order Quantity for 316/316L Steel Bars and Rods

Category: Stainless Steel Bars, Rods, Flats & AngleTags: 1.4401 Round Bars, 1.4404 Round Bars, Manufacturers, Round Bars Manufacturers, Round Bars Suppliers, Stainless Steel 316 Round Bars, Stainless Steel 316L Round Bars, Stainless Steel Bar Suppliers, Stainless Steel Bars, Stainless Steel Bars Manufacturers, Stainless Steel Round Bars, Suppliers, UNS S31600 Round Bars, UNS S31603 Round Bars

Product Description

Stainless Steel 316/316L Round Bars Manufacturers, UNS S30400/S30403, 1.4301/1.4306 Stainless Steel Bars Suppliers

AISI	EN / DIN	ASTM/UNS	EN	AFNOR	Reg.TM	Forging
316	1. 4401	S31600	X5CrNiMo17.12.2	Z7CND17.11.02	NA	A182 F316	Austenite
316L	1. 4404	S31603	X2CrNiMo17.13.2	Z3CND18.12.02	NA	A182 F316L	Austenite

Stainless steel 316/316L round bars are characterised by improved corrosion resistance in most acidic conditions, especially at higher temperatures and/or with chlorides present. Among 316 and 316L round bars 316L is more preferred for welded constructions. We are leading suppliers of “Dual Certified” stainless steel round bars meeting the requirements of both 316 and 316L.

榴莲视频 is an ISO 9001: 2008 Certified manufacturer and supplier of 316/316L stainless steel round bars and stainless steel 316 rods, with a supply base to all destinations in India and worldwide. linghang stocks and supplies a full range of 316/316L stainless steel round bars from 8mm diameter to 600 mm forged bars with 1 meters to 6 meters length.

We specialise in the export of a wide range of 316L stainless steel bar stock products such as Steel Rounds, Squares, Hexagons, Bright Bars of various grades which are used as raw material by various manufacturers in engineering, forging, oil and gas components, drilling materials, tools & dies, as well as auto component industry.

Stainless Steel 316 is the standard molybdenum-bearing grade, second in importance to SS 304 amongst the austenitic stainless steels. The molybdenum gives SS 316 better overall corrosion resistant properties than Stainless Steel 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Stainless Steel 316 has excellent forming and welding characteristics. It is readily brake or roll formed into a variety of parts for applications in the industrial, architectural, and transportation fields. SS 316 also has outstanding welding characteristics. Post-weld annealing is not required when welding thin sections.

SS 316L, the low carbon version of SS 316 and is immune from sensitisation (grain boundary carbide precipitation).SS 316H, with its higher carbon content has application at elevated temperatures, same as SS 316Ti which is a Titanium stabilised grade .SS 316N is nitrogen enhanced with greater strength than SS 316 .

Manufacturing Specifications for 316/316L Stainless Steel Round Bars, 316 Stainless Steel Rods

·ASTM A276 / A276M, Standard Specification for Stainless Steel Bars and Shapes

·ASTM A484 / A484M, Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

·ASTM A479/ A479M, Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

Designation of Stainless Steel 316/316L Grade Round Bars

Stainless Steel [SS] 316 / 316H / 316 L / 316N / 316Ti
AISI	316 / 316H / 316 L / 316N / 316Ti
UNS	S31600 / S31609 / S31603 / S31651 / S31635
Werkstoff Nr.	1.4401 / 1.4404 / 1.4432 / 1.4435 / 1.4429 / 1.4571

Chemical Composition of Stainless Steel 316/316L Round Bars/Rods

SS	316	316H	316N	316L	316Ti
Ni	10 – 14	10 – 14	10 – 14	10 – 14	10 – 14
Fe	Balance
Cr	16 – 18	16 – 18	16 – 18	16 – 18	16 – 18
Mo	2 – 3	2 – 3	2 – 3	2 – 3	2 – 3
C	0.08 max	0.10 max	0.03 max	0.03 max	0.08 max
Si	0.75 max	0.75 max	0.75 max	0.75 max	0.75 max
Mn	2 max	2 max	2 max	2 max	2 max
P	0.045 max	0.045 max	0.045 max	0.045 max	0.045 max
S	0.030 max	0.030 max	0.030 max	0.030 max	0.030 max
N	0.1 max		0.1 max	0.1 max	0.1 max
Ti					5 X % (C + N)

Mechanical and Physical Properties of Stainless Steel 316/316L Round Bars

Density	8.0 g/cm3
Melting Point	1400 °C (2550 °F)
Tensile Strength	Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset)	Psi – 30000 , MPa – 205
Elongation	35 %

Production and Supply Range for Stainless Steel 316/316L Round Bars – Buy Now!

Standard	316/316L, 1.4401, 1.4404
Designation	ASTM A276, A479, ASME SA276, 479
Range	3 MM TO 350 MM DIA
Finish	Bright, Polish & Black
Form	Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Stainless Steel 316/316L Bright Round Bars Manufacturers, Suppliers Size Range

榴莲视频 is a leading supplier of cold drawn machined bright bars with highest level of dimensional accuracy, right mechanical properties, and excellent machining capabilities.

Type	SIZES (mm)	SIZES (Inches)	ISO Tolerance
Cold Drawn and Polish	3.00 – 75.00	1/8” – 3.00”	h8-h9-h10-h11, ASTMA-484
Cold Drawn and Ground	10.00 – 75.00	5/6” – 2.50”	h8-h9-h10-h11
Peeled and Polished	40.00 – 150.00	1.50” – 6.00”	h11, ASTMA-484 h11-DIN 1013
Peeled and Ground	20.00 – 50.00	3/4″ – 2.00”	h9-h10-h11, ASTMA-484

Specifications for Stainless Steel 316/316L Cold Drawn Round Bars

We can give Chamfering of 30 or 45 degrees on one or both the ends. For Strain-Hardened Bars, we can supply in B8(304) and B8M(316) in Class1 and Class2.

Condition	Cold Drawn & Polished	Cold Drawn, Centreless Ground & Polished	Cold Drawn, Centreless Ground & Polished (Strain Hardened)
Grades	201, 202, 303, 304, 304L, 310, 316, 316L, 321, 410, 420, 416, 430, 431, 430F & others		304, 304L, 316, 316L
Diameter (Size)	2 mm to 5mm (1/8″ to 3/16″)	6mm to 22m (1/4″ to 7/8″)	10mm to 40mm (3/8″ to 1-1/2″)
Diameter Tolerance	h9 (Din 671),h11ASTM A 484	h9 (Din 671)ASTM A 484	h9 (Din 671),h11ASTM A 484
Length	3/4/5.6/6 meter(12/14ft/20feet)	3/4/5.6/6 meter(12/14ft/20feet)	3/4/5.6/6 meter(12/14ft/20feet)
Length Tolerance	-0/+200mm or+100mm or +50mm(-0 ”/+1 feet or +4 ” or 2 ”)	-0/+200mm or+100mm or +50mm(-0 ”/+1 feet or +4 ” or 2 ”)	-0/+200mm(-0 ”/+1 feet)

Specifications for Peeled Turned Polished Stainless Steel 316/316L Round Bars, Forged Bars

We can manufacture and offer stainless steel hot rolled round bars and rods in “As rolled condition” or “Heat treated condition”. All products supplied by linghang have passed IGC Practice E test, as well as UT Test.

Condition	Peeled, Centre less Ground & Polished	Peeled & Polished	Peeled(Rough Turned)	Forged,Rough Turned
Grades	201, 202, 303, 304, 304L, 310, 316, 316L, 321, 410, 420, 416, 430, 431, 430F & others		304, 304L, 316, 316L, 410, 416, 420, 431	303, 304, 304L, 316, 316L, 410, 416, 420, 431
Diameter (Size)	20mm to 85mm(3/4 ” to 3–1/4 ”)	85mm to 140mm(3-1/4 ” to 4–3/4 ”)	25mm to 140mm(1 ” to 5–1/2 ”)	150mm to 400mm (6 ” to 16”)
Diameter Tolerance	h9 (Din 671)ASTM A 484	h11	K12/K13(Din 1013)	-0mm/+3mm(-0 ”/+0.12 ”)
Length	3/4/5.6/6 meter(12/14ft/20feet)	3/4/5.6/6 meter(12/14ft/20feet)	3/4/5.6/6 meter(12/14ft/20feet)	3 meter -5 meter10 feet -16 feet
Length Tolerance	-0/+200mm or+100mm or +50mm(-0 ”/+1 feet or +4 ” or 2 ”)	-0/+200mm or+100mm or +50mm(-0 ”/+1 feet or +4 ” or 2 ”)	-0/+1000mm or 500mm (-0 ”/+3 feet or +2 feet)	-0/+2 meter--0/+6 feet

If you are interested in our Stainless Steel Bar/Rod:

201,202,302, 303, 304, 304L, 304H, 309, 309S, 310, 310S, 310H, 316, 316L, 317/317L, 317LMN, 321, 321H, 330, 347, 347H, 904L, 403, 405, 409, 410, 410S, 410/HT, 416, 416HT, 420, 422, 430, 440C, Duplex 2205, Duplex 2304, Duplex 2507.

Please Feel Free to Contact With Us!

Feedback